Triple 300ml SoLoc® Standard Holder

Standard Triple Holder designed to hold most 250-300ml round bottles. Lockable with unique sliding front plate feature for easy cleaning and loading. Recommended for business and home use.

Material
2.5mm 304 certified European stainless steel.

Finishes
Hand polished or satin black powder coated.

Made in England. Sold without products.

Holder dimensions with bottle loaded (excluding pump)
H x 120mm W x 196mm D x 68mm. Measurement taken using common standard 300ml PET bottle, size may differ. Space required to include loading of bottle due to front plate sliding upwards H x 150mm.

Bottle Sizes
Suitable for bottle sizes up to 62mm diameter x 120mm in height (top of shoulder which will increase height). Bottle neck size 29.5mm, in some cases pumps will need to be removed before loading bottles.

PLEASE CHECK YOUR BOTTLE SIZE PRIOR TO ORDERING.

Weight
850g

We highly recommend using plugs and screws to secure your holder. Tape can be used if applied to a clean smooth surface, however we recommend using a silicone adhesive in concurrent with the tape, do not rely on the tape alone. Clean the surface with the alcohol wipe provided making sure its dry before applying your holder.

SoHo Dispensers does not install holders nor guarantees any of the fixings or tape supplied, due to different surface types. The fixing method of the holder is down to the purchaser.

Hand Basin Location
Fit allowing suitable height above and below holder for access for re-filling and changing the bottle. Recommended minimum height from work surface to bottom of holder = 10cm.

Shower Location
If possible, locate the holder arms reach from shower head, not directly beneath it. We recommended a minimum height of 100cm from floor to bottom of holder and if possible fit dispenser into a corner so not to be a hazard.

Loading Holders
1) Loosen screws with allen key.
2) Load bottles by positioning pumps through large holes in the front plate that lifts up.
3) Once bottles are positioned lower the front plate until it rests on the shoulder of the bottle/bottles, then tighten screws, your bottles should now be secure.

Some pumps may be too large to go through the top holder holes, so these may have to be removed first.

Topping-Up
Remove pump and top-up, bottles only need to be removed when cleaning or changing. For maximum presentation keep bottles topped up at all times.

Cleaning
For care of your holder, we recommend removing bottles monthly and clean thoroughly using a micro fibre cloth and soapy water. If positioned in hard water areas, white vinegar or lemon juice is recommended for removal of lime scale. Harsh chemicals or abrasive cleaners should not be used to clean these holders, these may cause damage to the surface.

Warranty
Our holders are guaranteed for two years against manufacturing defects or operation. Holders are not guaranteed against misuse of cleaning. SoHo Dispensers does not guarantee the fixings supplied, the purchasers own fixings, or the installation whatsoever. If necessary, seek professional advice prior to installation.

Shipping to Europe – please read

We do not charge UK VAT on orders going to Europe, so please be aware that you will be charged your country’s rate of VAT on the import value of the goods and there will also be a small customs handling charge levied by the carrier which we are unable to control. VAT registered businesses can reclaim the VAT that they are charged in their country.

We ship to Europe using FedEx or DPD and the incoterm we use is DAP (Delivered at Place).You will need to respond promptly to requests from the carrier for additional clearance information along with payment of taxes and fees, as failure to do so will result in the order being returned. If in doubt, please contact your local customs authority before placing your order.

Shipping to the USA – please read

We do not charge any taxes on orders going to the USA, and as things stand currently there is no USA import duty on our UK made holders where the order value is less than $800. This is subject to change at any time.

You will still be charged a small customs handling fee by FedEx for handling customs clearance. For orders above $800 the current tariff is 10% duty on our holders.

We ship to the USA using FedEx and the incoterm we use is DAP (Delivered at Place).You will need to respond promptly to requests from FedEx for additional clearance information along with payment of any fees, as failure to do so will result in the order being returned. If in doubt, please contact the US customs authority before placing your order.

Shipping Costs will show at the checkout